112
Configure an E1/T1 card
Figure 23
Ping results of a successful E1/T1 connection to ELAN subnet
Figure 24
Ping results of no E1/T1 connection to ELAN subnet
Remote access to the E1/T1 card
Remote access to the E1/T1 card is supported through:
•
Telnet
•
FTP
You can connect a modem to the E1/T1 card through a serial port 9-pin
connector. The E1/T1 card ignores all RS-232 control signals, so a
modem eliminator (null modem) is required as shown in
Nortel Communication Server 1000
Media Gateway 1000E PRI Gateway Installation and Commissioning
NN43041-311 04.01
4 June 2010
Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
.
Содержание 1000E PRI
Страница 161: ......