viii
MM271 Installation Instructions
MM271 Installation Instructions
ix
Product identification label (1)
installed on the side of the Control box.
Labels (1) installed on the front of control box
Control arm label (2) installed on operator arm
mightymule.com
MM271
1. KEEP CLEAR! Gate may move at any time.
2. Read all SAFETY INSTRUCTIONS in the user’s
manual.
3. Do not allow children to operate gate or play in
gate area.
4. This gate is for vehicles only. Pedestrians must
use separate entrance.
1. TENEZ-VOUS LOIN! La barrière peut se déplacer
à tout moment.
2. Lisez toutes les instructions de sécurité dans le
manuel de l'utilisateur.
3. Ne laissez pas les enfants utiliser la barrière ou
jouer à proximité de la barrière.
4. Cette barrière est uniquement réservée aux
véhicules. Les piétons doivent utiliser une autre
entrée.
AVERTISSEMENT
WARNING
La barrière en mouvement
peut provoquer des blessures
graves ou la mort!
Moving gate can cause injury
or death!
10019665A
GEN7 SERIES
– DC Swing Gate Operator
P/N MM271
Conforms to UL STD 325 • Certified to CSA STD C22.2 No.247
Maximum Gate: 300 lb. (136 kg); 12 ft. (3.65 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 25 W
Class I Vehicular Gate
S/N: YYYYMMDDx0000
Nortek Security & Control – Carlsbad, CA USA
E472888
Warning Sign
Pedestrian Gate
Pedestrian Gate Lock
Vehicular Gate
(recommended, not included)
7 foot
minimum
Important Safety Information
Important Safety Information
Warning signs alert people of automatic gate operation and are required when installing Mighty Mule Automatic
Gate Operators. A minimum of two WARNING SIGNS must be installed in the area of the gate. Each sign is to be
visible by persons located on the side of the gate on which the placard is installed.
The operator is intended for installation only on gates used for vehicles. Pedestrians must be supplied with a
separate access opening. The pedestrian access opening shall be designed to promote pedestrian usage. Locate
the gate such that persons will not come in contact with the vehicular gate during the entire path of travel of the
vehicular gate.
We recommend using the Bulldog Pedestrian Gate Lock (Call the Nortek Security and Control Sales Department
at 800-543-4283) for controlled access.
INSTALLING WARNING SIGNS AND PEDESTRIAN GATES
Warning Signs
The gate operator is provided with 2 safety warning signs.
The signs
MUST
be installed on the front and back of the
gate where they will be visible in the area of the gate.
Permanently secure each warning sign to the gate.
Immediately replace a damaged, eligible or missing
warning sign.
Call Customer Service at 800-543-4283 for a free
replacement.
!
These warning labels should be found at the locations specified below. If any of them are missing, immediately
contact Nortek Security and Control for replacements.
REQUIRED SAFETY PRECAUTIONS FOR GATES
