Norstar Modular ICS 5.0 Companion, Руководство по установке

Страница: 70 / 139

64 / Programming
Modular ICS 5.0 Companion Installer Guide P0941568 01
There are only two reasons to modify the system LID.
• The site has multiple systems, and you want users to be
able to move from system to system without changing slots
on their portable telephones. All systems must be set to the
same system LID.
• Two systems that are located near each other were
accidentally assigned the same system LID. Users of one
system can access the other system.
Note: This highly unlikely situation could occur, for
example, in an office building occupied by multiple
organizations.
Use
­
and
CHANGE
to modify the System LID.
Software keys (U.S. only)
The United States FCC has appointed UTAM Inc. as the body
responsible for coordinating and verifying the installation or
relocation of unlicensed, personal wireless communication
devices. To comply with UTAM Inc., Norstar uses keys and
credits to control user capacity and to ensure system location
verification. These software keys and credits are required to
activate Norstar Companion services on a new or upgraded
system. The credits should have been purchased at the time the
order was placed.
Base stations must be installed and powered first.
Base stations must be installed and powered before
entering any UTAM Activation Keys. Verify that the base
station LED status is solid red and green before entering
any UTAM keys. Failure to follow the correct order of
UTAM key entry may result in a disabled Norstar
Companion system.