EPS146
Instruction Manual (Read before proceeding)
Power:
z
Please charge your Bluetooth speaker fully before its first use.
z
Operates using an internal rechargeable Lithium battery.
To charge the battery:
z
Using
a
Micro
USB cable (included), insert the USB power cable into the micro USB
port located on the back of the speaker. Connect the other end of the USB cord into a
powered USB source such as a computer, laptop or USB AC adapter (not included).
z
When your Bluetooth speaker is charging, the indicator light will turn red.
z
Once your Bluetooth speaker is fully charged, the red light will turn off.
Playing Music Via Bluetooth
z
Turn your Bluetooth speaker on by sliding the power switch located on the back of the
speaker to ‘ON’ position.
z
The indicator light will turn blue. This indicates that the speaker is in pairing mode and
is searching for your Bluetooth device.
z
Make sure the Bluetooth function on your device is turned on.
z
Search the speaker named, ”BT-09”.
z
Once you have selected the speaker, your device will pair without a password. (If your
device prompts for a password, enter the password”0000”.
z
Once your speaker is paired, the indicator light will begin to flash blue slowly.
z
Start playing music on your device. Make sure that you keep your device within a 33
feet range of your Bluetooth speaker.
z
Adjust the volume of your device to a comfortable level.
z
Turn off the unit when it is not in use.
Universal Speaker Operation:
z
For devices that are not Bluetooth enabled, use the audio input cable (not included)
z
Insert the 3.5mm input jack into the “AUX” port
z
Turn on the unit by sliding the power switch located on the back of the speaker to ‘ON’
position and start listening to music.
Warning:
z
This is not a toy. Please keep away from small children.
z
Please keep away from water and heat.
z
Low battery may cause poor connection and/or may cause the Bluetooth function to
not work.
z
Do not over charge the battery.
