SK155
© NØRSE
9
© NØRSE
English
The following cleaning procedure will ensure that you achieve the most beneficial results in the shortest
amount of time.
Surface preparation
Clear the working area and make sure that all windows and doors are closed tightly. Make sure that all
plants and trees adjacent to the cleaning area are protected by a drop cloth.
Initial high pressure rinse
The next step is to spray the cleaning surface with water to clear off any dirt or grime that may have
collected on the surface. If you use detergent, this will allow your detergent to attack the dirt that has
worked its way into the cleaning surface. Before triggering the gun, adjust the nozzle to a wide spray
pattern and slowly adjust to the desired spray pattern. This will help you avoid applying too much
pressure to the surface that could cause damage.
Detergent
Use the detergent nozzle to apply detergent. Some cleaning tasks can be completed with water alone,
but for most tasks the removal of dirt becomes more effective if a detergent is used.
NOTE:
Only use mild, environmentally friendly detergents. Never use aggressive chemicals, abrasive
detergents or similar to avoid damage to your health, the product and the environment.
1. Attach the detergent nozzle (21) to the spray
gun (10)
2. Remove the detergent tank (17) from the back
of the main unit and unscrew the cap (17b) to
open then container (17c)
3. Fill with suitable detergent
4. Screw the cap back to the container (17c)
5. Adjust the detergent flow with the regulator
(17a) on the cap (17b)
WARNING!
Avoid skin contact with detergents, in particular contact with eyes! If detergent
gets in your eyes flush your eyes with clean water and seek immediate medical attention!
17c
17b
21
10
17b
17a
