SK155
© NØRSE
15
© NØRSE
English
Troubleshooting
Technical Data
Symptom
Possible Cause(s)
Corrective Actions
No detergent
suction
1. Detergent tank is clogged
1. Clean detergent tank with warm water
Pressure washer
does not start up
1. Unit is pressurised
2. Plug is not connected correctly or
electrical supply is damaged / faulty
3. Thermal safety switch has tripped
1. Clean water inlet
2. Check that connections are properly
tightened
3. Switch off unit and allow to cool down
Pump does not
reach necessary
pressure
1. Water inlet is clogged
2. Pump sucking air from hose
connections
3. Variable spray nozzle is worn or not
correct size
4. Unloader / valves are clogged/ worn
1. Clean quick connector filter
2. Check that connections are properly
tightened
3. Call the dealer
4. Call the dealer
Fluctuating
pressure
1. Pump is sucking air
2. Clogged nozzle
3. Valves dirty, worn or clogged
4. Water seals worn
1. Check that hoses and connections are tight
2. Clean with tip cleaner
3. Call the dealer
4. Call the dealer
Motor stops
suddenly
1. Thermal safety switch has tripped due
to overheating
1. Check mains supply voltage corresponds to
specifications
Item
SK155
Working pressure
15.0 MPa / 150 BAR / 2200 PSI
Allowable pressure
25.5 MPa / 255 BAR / 3700 PSI
Maximum flow rate
560 Litres / hour
Motor capacity
2600 Watt
Power supply voltage
240V ~ 50HZ
Intake water pressure
Min 0.1MPa / Max 1MPa
Max input temperature
50 °
Dimensions
360 x 400 x 750 mm
Weight
25.8Kg