ATOM Ka 25-50W BUC & SSPA
Revision 1.3
039092
14
039092_r1.3 - Operator Manual ATOM Ka
25-50W.doc
Section 2.4
J2
–
M
ONITOR AND
C
ONTROL
I
NTERFACE
The M&C interface is used to control the unit with a host computer. All on-board sensors are accessed
through this interface. Use of this connection is optional. Each ATOM is supplied with a mating
connector for the M&C interface.
The 25-50W ATOM can be ordered with standard or Ethernet web interface options.
Table 2-3
summarizes the M&C interface protocols available with each option.
Table 2-2: M&C Interface Options
Orderable Option
Communication Interfaces
RS-485
RS-232
Web Interface
Standard
X
X
Ethernet Option
X
X
M
ONITOR AND
C
ONTROL
I
NTERFACE
P
INOUT
The M&C interface is a ten pin miniature circular connector. This connector is a MIL-C-26482 Series 1
receptacle, shell size 12, 10 pin (Amphenol® part number 71-533723-10P). A mating connector is
Amphenol® part number PT06E-12-10S-SR. A range of compatible part numbers for the mating
connector may be used to add options to the plug such as right-angle, stress relief clamp, metal
color/finish, etc. Please contact the connector manufacturer for more information and/or refer to
Amphenol® catalog 12-070.
Figure 2-9: J2 M&C Connector Pin Arrangement
summarizes the various pinout options for the 25-50W ATOM Ka. Note that the pin function
varies according to the M&C interface option that the ATOM was ordered with. The M&C interface option
cannot be changed by the user.