OPERATION AND MAINTENANCE MANUAL SL III ORIGINAL INSTRUCTION
Norlok Technology Inc.
519-759-5896
fax 519-759-2948
Page
|
27
Document No: 110011
Rev. No: 5.0
SECTION 7.0 - MAINTENANCE
PREVENTATIVE MAINTENANCE
DESCRIPTION
DAILY
WEEKLY MONTHLY
1.
Ensure all guards and safety equipment are in place.
X
2.
Drain moisture from air tank (if supplied).
X
3.
Maintain correct inlet air pressure.
X
4.
Check and maintain correct air regulator pressure.
X
5.
Check automatic return and adjust if necessary (if equipped).
X
6.
Clean and oil die.
X
7.
Clean and oil punch.
X
8.
Make sure that the machine is set for the correct material thickness
X
9.
Is the correct die installed?
X
10.
Is the correct tooling adjustment set?
X
11.
Check and clean air filters.
X
12.
Check for air leaks.
X
13.
Check for air leaks when making a clinch (around WAMP unit)
X
14.
Grease upper tooling
X
15.
Check laser operation (If supplied)
X
16.
Check tightness of bolts. i.e Stand, WAMP etc.
X
Table 9
