Norland Elite 437A150 Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 490

Norland Elite 437A150 Скачать руководство пользователя страница 133

Operator's Guide
437D140 Rev. I

Basic Operation

4-25

Patient Demographics Window Details

Button Functions

- will save a

NEW

patient demographic record to the current database. On the other hand, clicking

SAVE will overwrite the data carried in an

EXISTING

patient’s record from their previous visits.

- deletes all the entries typed since the record was opened.

- returns you to the main Database Navigator window (will loose all data recently typed).

- click when the patient record is complete and the operator is ready to perform a scan. Clicking

this from the Patient Demographic window will create a new visit record for the current date.

- click to open the Stamp View window.

Field Entry Details

Last name (*mandatory), First Name (*mandatory) and MI (middle initial, optional)

Patient ID (*mandatory) must be unique to be accepted. For example: SSN or Clinic/Hospital ID. If the ID is
already in use, a message will display indicating that the value is already in use.

Sex: click the appropriate button. Male or female must be chosen in order to automatically display Reference
Charts on the reports.

The Ethnicity field has a drop down list for easy selection. Click the drop-down arrow and select. An eth-
nicity must be entered in order to automatically display Reference Charts on the reports. If the ethnicity is
not listed, click the Notepad button and type one in; however, reference graphs will not be displayed unless a
matching reference data set is loaded. Refer to "How to Customize a “Drop-Down List” Field" on page 4-30.

The Date of Birth field has the capability to call up a calendar from any year. Simply type in the birth year in
a 4-digit format (ex: 1956) and click the drop-down arrow. Click the left and right arrows to move to the birth
month. Click on the birth day, and the date will automatically drop into the field (and the calendar closes).
The “Date of Birth” must be entered in order to automatically display Reference Charts on the reports.

«
...
131
132
133
134
135
...
»

Содержание Elite 437A150











































































































































































































































































































































































































































































































Отзывы:

Нет отзывов