Noritz NC1991-DVC Скачать руководство пользователя страница 1

SBA8883
Rev. 12/11

 

Models : NC1991-OD

 

 NC1991-DVC

TANKLESS GAS WATER HEATER

Owner’s Guide

NORITZ America Corporation

- Do not store or use gasoline or other flammable vapors and liquids in the 

vicinity of this or any other appliance.

- WHAT TO DO IF YOU SMELL GAS

• Do not try to light any appliance.

• Do not touch any electrical switch; do not use any phone in your building.

• Immediately call your gas supplier from a neighbor’s phone. Follow the 

gas supplier’s instructions.

• If you cannot reach your gas supplier, call the fire department.

- Installation and service must be performed by a qualified installer, service 

agency or the gas supplier.

If the information in this manual is not followed exactly, a fire or explosion 

may result causing property damage, personal injury, or death.

WARNING

Thank you for purchasing this Noritz Tankless Gas Water Heater. 

Before using, please:

Read this manual completely for operation instructions.

Completely fill out the warranty registration card (included separately) and 

mail the detachable portion to Noritz America Corporation.

Keep this manual (and the remainder of the warranty registration card) where 

it can be found whenever necessary.
Installation must conform with local codes, or in the absence of local codes, 

the National Fuel Gas Code, ANSI Z223.1/NFPA 54.

When applicable, installation must conform with the Manufactured Home 

Construction and Safety Standard, Title 24 CFR, Part 3280 or the Canadian 

Standard CAN/CSA-Z240 MH Mobile Homes, Series M86.

Noritz America reserves the right to discontinue, or change at any time, the 

designs and/or specifications of its products without notice.

FOR USE IN COMMERCIAL OR MANUFACTURED HOME  APPLICATIONS.

CERTIFIED

R

*SBA8883*

Low NOx Approved

by SCAQMD

14 ng/J or 20 ppm

(Natural Gas Only)

Содержание NC1991-DVC

















































Отзывы: