Noritsu LS-600 страница 81 Скачать руководство пользователя

Страница: 81 / 94

6.3 Monthly Checks

6 ñ 13

ily

Close the film advance top cover, side cover (left) and front cover.

If cleaning each brush of the film advance unit, it is not necessary to close the film advance top cover, side cover
(left) and front cover.

This completes cleaning each roller, and the film path of the film feed unit.

6.3.4 Cleaning each brush of the film feed unit

Conditions

Perform this maintenance operation with the power on.

Requirements

ï Clean gloves
ï Blower brush

Select the 240 lane of the film feed unit.

MPORTANT

ï If the 135 lane of the film advance unit is selected, it is necessary to select the 240 lane by following

the procedure below. If the 135 lane is selected, the film advance top cover cannot be opened fully.

(1)

Slightly open the front cover, then close it.

OTE

ï Closing the front cover selects the 240 lane of the film feed unit.

Open the front cover and side cover (left).

Put on clean gloves.

Front cover

G088421

Side cover (left)

Front cover

G087613

Содержание LS-600































































































Результаты поиска

Содержание LS-600

Отзывы:

Похожие инструкции для LS-600

Бренды по названию

Популярные бренды

Noritsu LS-600, Руководство по эксплуатации

Результаты поиска

Содержание LS-600

Отзывы:

Похожие инструкции для LS-600

Бренды по названию

Популярные бренды