UltimusPlus Dispenser Network Connection
Instructions
Introduction
This document provides procedures for connecting the UltimusPlus
™
fluid dispenser to a network and then sending
commands to the dispenser, including commands to remotely switch dispense programs.
Connecting the Dispenser to a Computer
1. Switch ON the dispenser power.
2. Using standard Ethernet cables and an Ethernet switch, connect a personal computer with a static IP address to the
Ethernet port on the back of the UltimusPlus dispenser.
3. To set up your computer with the correct IP settings, continue to “Setting the IP Address of a Computer” on page 2.
Power ON
Ethernet
port
Ethernet cable
Ethernet
switch
Making the Ethernet connection between the
UltimusPlus dispenser and a computer
Ethernet cable
