Nordson Tribomatic 2, Руководство пользователя по изделию

Страница: 13 / 73

Safety
1-7
E 1995 Nordson Corporation
All rights reserved
Issued 11/95 A1EN − 03 − [SF − POWD] − 4
Operators should also be aware of less-obvious dangers in the workplace
that often cannot be completely eliminated:
S
exposed surfaces on the equipment which may be hot or have sharp
edges and cannot be practically safeguarded
S
electrical equipment which may remain energized for a period of time
after the equipment has been shut off
S
vapors and materials which may cause allergic reactions or other
health problems
S
automatic hydraulic, pneumatic, or mechanical equipment or parts
that may move without warning
S
unguarded, moving mechanical assemblies
Do not operate a system that contains malfunctioning components. If a
component malfunctions, turn the system OFF immediately.
S
Disconnect and lock out electrical power. Close and lock out
hydraulic and pneumatic shutoff valves and relieve pressures.
S
Allow only qualified personnel to make repairs. Repair or replace the
malfunctioning component.
Allow only qualified personnel to perform maintenance, troubleshooting,
and repair tasks.
S
Always wear appropriate protective devices and use safety devices
when working on this equipment.
S
Follow the recommended maintenance procedures in your equipment
manuals.
S
Do not service or adjust any equipment unless another person trained
in first aid and CPR is present.
S
Use only genuine Nordson replacement parts. Using unapproved
parts or making unapproved modifications to equipment may void
agency approvals and create safety hazards.
7. Less-Obvious Dangers
8. Action in the Event of a
System or Component
Malfunction
9. Maintenance and Repair