Nordson Spectrum II S2-900 C Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 121 / 262

Operation 4-49
Figure 4-47 Production Window

The Machine Setup Window opens (Figure 4-48). The name of the current script
file is displayed in the top left area the window.
Figure 4-48 Machine Setup Window
c.
Verify that the correct script file is selected. If not, choose
Select File
, select a script
file from the list, and click on
Open
.

NOTE The tasks in the Machine Setup window vary depending on the selected setup
script. The tasks are performed in the order listed. When a task is complete, a
checkmark appears in the box next to the task.
d. Adjust the camera focus and lighting for the best image of the target surface.
e. Click on
Run to End
. See
4.9 Valve Offsets
for more information.

If you receive a warning message stating that the dispensing head will move to the
home position, select
Yes
.

Follow the on-screen prompts. Refer to the
Fluidmove User Guide
or Online Help
if necessary.

When done, Fluidmove will display an “Offsets Complete” message.