Nordson PowderPilot HD, Руководство пользователя

Страница: 27 / 52

Powder Pilot ™HD
P/No.7192721_02
Page | 27
GUN CONFIGURATION
Pressing the button on
the gun spray control screen will show up the gun configuration
screen below:
Exit screen 1 2 3
4 5 6 7 8 9 10 11
1 – after spray – This value shows how many millimetres after the product has left that the gun will
switch off. Touch the value and a keypad will appear to adjust it.
2 – before spray – This value shows how many millimetres before the product arrives at the gun it will
fire. Touch the value and a keypad will appear to adjust it.
3 – gun parameter selection – These buttons select the guns parameters to be displayed and
adjusted. The gun currently selected, will flash yellow.
4 – vertical distance – This value shows the distance between the gun at the top of its stroke, and
the top of the booth slot in millimetres. Touch the value and a keypad will appear to adjust it.
2