manualshive.com logo in svg

Nordson iDry Series, Руководство по эксплуатации продукта, Страница: 7 / 57

Поделиться
Скачать
Nordson iDry Series Скачать руководство пользователя страница 7

Nordson iDry

r

 Series Induction Dryers

1

Part 1075452

−

04

E

 2016 Nordson Corporation

Nordson iDry

r

 Series Induction Dryers

Safety

Read and follow these safety instructions.  Task- and equipment-specific

warnings, cautions, and instructions are included in equipment

documentation where appropriate.

Make sure all equipment documentation, including these instructions, is

accessible to persons operating or servicing equipment.

Qualified Personnel

Equipment owners are responsible for making sure that Nordson equipment

is installed, operated, and serviced by qualified personnel.

Qualified personnel are those employees or contractors that

S

have experience operating and maintaining high-power and high-voltage
electrical equipment.

S

can safely perform their assigned tasks.

S

are familiar with all relevant safety rules and regulations and are
physically capable of performing their assigned tasks.

WARNING: 

 The control enclosure and coil tray contain high voltages and

high power levels.  Failure to ensure and employ all appropriate safety

measures may result in serious injury or death.

Intended Use

Use of Nordson equipment in ways other than those described in the

documentation supplied with the equipment may result in injury to persons

or damage to property.

Some examples of unintended use of equipment include

S

using incompatible materials and atmospheres

S

making unauthorized modifications

S

removing or bypassing safety guards or interlocks

S

using incompatible or damaged parts

S

using unapproved auxiliary equipment

S

operating equipment in excess of maximum ratings

Содержание iDry Series


























































Отзывы:

Нет отзывов