Instruction Sheet
Part 1102354-02
E
2018 Nordson Corporation
P/N 1102354-02
CoolWave
r
2 Transformer T3
and Wire Harness Upgrade Kit
Use the transformer and harness kit to upgrade or replace the Coolwave
r
2
transformer.
NOTE:
Retain the box used for shipping the T3 transformer and wiring to
comply with the conditions of warranty.
WARNING:
Allow only qualified personnel to perform the following tasks.
Follow the safety instructions in this document and all other related
documentation. A qualified and competent electrician must carry out all
electrical maintenance and servicing of this equipment.
WARNING:
This equipment operates at high voltages up to 5000 volts dc
and is therefore potentially dangerous. The electrician servicing this
equipment must take all precautions.
WARNING:
Isolate the equipment at the main disconnect or lockout before
removing any of the cover panels.
T3 Transformer Versions
See Figure 1. Previous versions of the T3 transformer could have either
pigtail wires or Faston terminals.
NOTE:
If transformer has Faston terminals, procedures for replacing wires
is not necessary.
Transformer with Pigtail Wires
Transformer with Faston Terminals
Faston Terminal
Figure 1
Old Versions of theTransformer
