Nordson AltaBlue, Руководство пользователя по изделию

Страница: 81 / 234

Configuring and Modifying Temperature, Pump and Melter Settings
6-3
Part 1120130
E
2011 Nordson Corporation
Manage Temperature Settings
The following table details each temperature settings.
Button Use this to… Default Range
Setpoints Define the setpoint temperatures for heated
(internal and external) zones.
Touch to define one global temperature
for all connected zones
Touch (the default) to define each zone
individually.
NOTE: To minimize charring the adhesive
material, you can define the hopper setpoint
temperature up to 15C (30F) cooler than the
reservoir setpoint temperature
NOTE: The Hopper setpoint temperature
cannot exceed that of the reservoir.
Internal Zones:
Temp: 175C
(350F)
External Zones:
Temp: 175C
(350F)
Min: 40C (100F)
Max: 230C
(450F)
Temperature
Limits Temperature Limits
Define the over and under temperature
threshold values, allowing the system to
alert you before an over/under temperature
fault occurs.
NOTE: For setpoint limits, the system uses
the differential temperature conversion
method. For Celsius to Fahrenheit multiply
Celsius by 1.8. For Fahrenheit to Celsius
divide by 1.8
Over Temp Limit:
15C (25F) Over Temp
Limit:
Min: 5C (10F)
Max: 60C
(110F)
Under Temp Limit:
25C (50F) Under Temp
Limit:
5C (10F)
60C (110F)
PID Settings Define the P roportional, I ntegral and
D ifferential (control aspects) of standard or
large applicators, hoses and air heaters.
Zone A – Hose
Zone B – Standard
Applicator Hose Standard
Applicator
Large
Applicator Air
heater
Heater Zone
Control Enable or Disable individual external zones. Internal : Enabled
External: Disabled
NOTE: If you
defined a Global
temperature, then
all external zones
with connected
devices
automatically
become Enabled.
Enabled
Disabled
Ready Delay Define the amount of time to delay the
Melter “Ready” (green) status, thereby
allowing enough time for the hot melt
material in the reservoir to reach its normal
operation. 0 minutes
(disabled) Min: 0 minutes
Max: 1440
minutes