Nordmann Engineering Omega 12, Руководство по эксплуатации

Страница: 102 / 104

102
11.1.5 Fin sauna application
In the Fin sauna application, the cabin is equipped with a sauna heater only. The cabin temperature can
be regulated up to 110 °C, whereby the relative humidity is around 10%.
The operation of the Fin sauna application can be divided into several phases:
– Ready
The system is ready for operation and can be started.
– Warm-up phase: In the warm-up phase, the system is brought to operating temperature.
– Bathing phase: During the bathing phase (sweating phase), the cabin temperature is regulated
to the set target temperature.
– Drying phase: After the bathing phase, a drying phase follows to dry the cabin.
Optionally, it can be determined whether the system switches to a keep warm state after the bathing
phase, in which the cabin temperature is regulated to a set keep warm temperature value. Thus, the
warm-up phase can be reduced for the next bathing operation. Light and additional relays can be freely
configured in which phase they should be active. Below is a possible configuration shown.
Ready Warm-up phase Bathing phase (Sweating phase) Drying phase
Heating (Sauna heater)
Light
Ventilation
Additional relay
Bathing time (Sweating time)
Drying time
Fan lead time
Light follow-up time