NordicTrack E 15.0 Elliptical Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 40

NordicTrack E 15.0 Elliptical Скачать руководство пользователя страница 22

22

6. Turn on the fan if desired.

The fan has several speed settings, including an
auto mode. While the auto mode is selected, the
speed of the fan will automatically increase or
decrease as you increase or decrease your pedal-
ing speed. Press the Fan increase and decrease
buttons repeatedly to select a fan speed or to turn
off the fan.

Note: If the pedals do not move for about thirty
seconds, the fan will turn off automatically.

7.

When you are finished exercising, unplug the
power cord.

If the pedals do not move for several seconds, a
tone will sound and the console will pause.

If the pedals do not move for several minutes and
the buttons are not pressed, the console will turn
off and the display will be reset.

When you are finished exercising, press the power
switch to the off position and unplug the power
cord.

IMPORTANT: If you do not do this, the

electrical components on the elliptical may
wear prematurely.

HOW TO USE AN ONBOARD WORKOUT

1.

Begin pedaling or press any button on the
console to turn on the console.

See HOW TO TURN ON THE POWER on
page 19.

2. Select an onboard workout.

To select an onboard workout, touch the Runner
button in the lower left corner of the screen. The
workouts menu will appear on the screen.

Select the desired workout category from the work-
outs menu and then, select the desired workout.
The screen will show the name, duration, and
distance of the workout. The screen will also show
the approximate number of calories you will burn
during the workout and a profile of the resistance
settings of the workout.

3.

Start the workout.

Touch the Start Workout button to start the workout.

Each workout is divided into segments. One resis-
tance level, one ramp incline level, and one target
rpm (speed) are programmed for each segment.
Note: The same resistance level, ramp incline
level, and/or target rpm may be programmed for
consecutive segments.

During the workout, the profiles will show your
progress. To view the profiles, flick or slide the
screen (see page 19). The vertical colored line
will indicate the current segment of the workout.
The lower profile represents the incline level of the
current segment. The upper profile represents the
resistance level of the current segment.

«
...
20
21
22
23
24
...
»

Содержание E 15.0 Elliptical









































Отзывы:

Нет отзывов