6
A.6
Machine cleaning and maintenance
• Refer to “A.3
“ for suitable personal protection equipment.
• Put the machine in safe conditions before starting any maintenance operation.
Disconnect the machine from the power supply and carefully unplug the power supply
cable, if present.
• Depending on the model and type of electric connection, during maintenance operations,
the cable and plug must be kept in a visible position by the operator carrying out the work.
• Do not touch the machine with wet hands or feet or when barefoot.
• Do not remove the safety guards.
• Use a ladder with suitable protection for work on machines with high accessibility.
• Respect the requirements for the various routine and extraordinary maintenance
operations. Non compliance with the instructions can create risks for personnel.
• Extraordinary maintenance, checking and overhaul operations must only be carried out
by a specialised personnel or the Customer Care Service, provided with suitable
personal protection equipment (safety shoes and gloves), tools and ancillary means.
Ordinary maintenance
• Do not clean the machine with jets of water.
• Contact with chemical substances (e.g. detergent, rinse aid, scale remover, etc.) without
taking appropriate safety precautions (e.g. personal protection equipment) can involve
exposure to chemical risk and possible damage to health. Therefore always refer to the
safety cards and labels on the products used.
Repair and extraordinary maintenance
• Repair and extraordinary maintenance have to be carried out by specialised authorised
personnel. The manufacturer declines any liability for any failure or damage caused by
the intervention of an unauthorized technician by the Manufacturer and the original
manufacturer warranty will be invalidated.
A.7
Machine disposal
• Work on the electrical equipment must only be carried out by a specialised personnel,
with the power supply disconnected.
• Dismantling operations must be carried out by specialised personnel.
• Make the appliance unusable by removing the power cable and any compartment
closing devices, to prevent the possibility of someone becoming trapped inside.
• Refer to “A.3
“ for suitable personal protection equipment.
• When scrapping the machine, the “CE“ marking, this manual and other documents
concerning the appliance must be destroyed.
IMPORTANT
Save these instructions carefully for further consultation by the various
operators.
B
WARRANTY
B.1
Warranty terms and exclusions
If the purchase of this product includes warranty coverage,
warranty is provided in line with local regulations and subject to
the product being installed and used for the purposes as
designed, and as described within the appropriate equipment
documentation.
Warranty will be applicable where the customer has used only
genuine spare parts and has performed maintenance in
accordance with Electrolux Professional user and mainte-
nance documentation made available in paper or electronic
format.
Electrolux Professional strongly recommends using Electrolux
Professional approved cleaning, rinse and descaling agents to
obtain optimal results and maintain product efficiency over
time.
The Electrolux Professional warranty does not cover:
