4 of 36
Palletizer for AUBO Robots - Installation Manual
–
Ver. 1.7
1.
Introduction
1.1.
Intended Use
This document serves as a guide for the installation of Nordbo Robotics’ palletizer software extension
made for AUBO manipulators. The physical construction of the palletizer setup must comply with the
software, and therefore general guidelines on how to build a compatible palletizing setup are
provided as well.
1.2.
Prerequisites
The person executing the instructions of this manual must have a clear understanding of the risks
related to working with robots. It is therefore required that the person executing this guide’s
instructions have made a risk assessment of the application in which the product is integrated before
using this manual. The person executing the instructions of this installation guide must further have
basic knowledge about, and skills working with, industrial and/or collaborative robots. The reader of
this manual must have basic knowledge about electric wiring and the dangers of working with
electricity. Information about the installation of the AUBO robot must be obtained from the manuals
by AUBO Robotics provided by your supplier when purchasing the robot.
