manualshive.com logo in svg

nord Stage 3, Руководство пользователя

Поделиться
Скачать
nord Stage 3 Скачать руководство пользователя страница 34

34  |   nORD StAgE 3 USER MAnUAL OS V1.X

SynC

“Oscillator Synchronization” involves using the signal from one oscillator 
to 

restart

 another oscillator. When sync is applied, the basic pitch of 

Oscillator 1 is locked to that of Oscillator 2 (the “sync” oscillator). As 
the relative pitch of the synchronized oscillator is varied, this will be 
perceived as a dramatic change in timbre. 

With Oscillator Sync, it can be useful to have the Osc Ctrl amount 
modulated from any of the Morph assign sources, or by the Modulation 
Envelope. this will generate a signal with continuously varied harmonic 
content.

the Sync configuration has no 

OSC2/PITCH

 settings.

 

M

S-Wave waveforms and Samples have no Sync configuration

DEtUnE

With the 

Detune

 configuration Oscillator 2 provides a copy of Oscillator 

1, which can be both coarsely tuned in semi tone intervals and fine 
tuned in small increments. 

OSC2/PITCH

 adjusts the pitch of Oscillator 2 in semi tones, and 

OSC 

CTRL 

is used for fine tuning within a range of four semitones. 

 

M

S-Wave waveforms and Samples have no Detune configuration.

MIX SInE, tRIAngLE, SAW AnD SQUARE

With the 

Sine

, 

Triangle

, 

Saw

 and 

Square

 Mix configurations Oscillator 2 

provides one of these four basic waveforms. Oscillator 2 can be mixed 
with Oscillator 1 using 

OSC CTRL

. 

OSC2/PITCH

 controls the pitch of Oscillator 2 in semitone steps, ranging 

from 0 to 48.

MIX BELL

A special “bell oscillator” can be mixed with Oscillator 1, using the 

Mix 

Bell

 oscillator configuration. Amplitude modulation is used to create a 

complex bell-like waveform in Oscillator 2. 

OSC CTRL

 controls the pitch 

of the Oscillator 2 modulator, and thereby its harmonic content and 
character.

MIX nOISE

the 

Mix Noise

 oscillator configuration provides a white noise generator, 

which can be 

mixed

 with the main oscillator using 

OSC CTRL

.

the Mix noise configuration has no 

OSC2/PITCH

 settings.

MIX nOISE 2

the 

Mix Noise 2

 oscillator configuration provides a band-passed and 

resonant, pitched noise, which can be 

mixed

 with the main oscillator 

using 

OSC CTRL

. 

OSC2/PITCH

 controls the pitch of the noise in semitone steps, ranging 

from 0 to 48.

DUAL FM

the basic principle behind 

frequency modulation

 (FM) synthesis is that 

one oscillator (the modulator) modulates the frequency of another (the 
carrier). the resulting waveform is far more rich in harmonics than the 
original Sine waveform, and drastic changes in tonal character are pro-
vided by altering the amount of modulation.

traditionally, FM oscillators are referred to as 

operators

, and the Dual FM 

configuration represents a 2-operator FM setup.

the number of harmonics, and their intensity, increase proportionally to 
the FM amount, controlled by 

OSC CTRL

. As usual, this parameter can 

be modulated by the Modulation Envelope or the LFO, and it can be 
Morph controlled by any combination of wheel, aftertouch and pedal.

OSC2/PITCH

 controls the pitch of Oscillator 2 (the “modulator”) in semi-

tone steps, ranging from 0 to 48.

 

M

S-Wave waveforms and Samples have no Dual FM configuration.

tRIPLE FM

the triple FM configuration represents a 3-operator setup, where Os-
cillator 2 is a modulator pair. the amount of modulation applied by the 
modulator pair is controlled by 

OSC CTRL

.

OSC2/PITCH

 controls the pitch of  the modulator pair in semitone steps, 

ranging from 0 to 48.

 

M

S-Wave waveforms and Samples have no Triple FM configuration.

RIng MOD

With the Ring Mod (Ring Modulation) configuration, Oscillator 1 will be 

multiplied

 with a sine wave from Oscillator 2. this multiplication results 

in additional tones appearing, the pitches of which depend on the pitch 
relationship between Oscillator 1 and Oscillator 2.

OSC2/PITCH 

controls the pitch of Oscillator 2, and accordingly the char-

acter of the resulting signal. 

OSC CTRL

 sets the mix of Oscillator 1 and the modulated signal. 

Synth PRESEtS

When a nord Stage 3 program is stored, its Synth settings are stored 
together with all other panel settings – but it is also possible to select 
and store Synth sounds 

separately

 from programs. this way a library 

of your favorite synth sounds can be built, easily accessible whenever 
needed. the nord Stage 3 also comes with a large selection of useful 
Synth Presets right from the start. 

SELECtIng Synth PRESEtS

there are 8 banks of 50 synth presets each, two of which are empty 
when shipped from the factory. Simply turn the 

SYNTH PRESET

 dial in 

order to browse and audition presets. the Program section display will 
show the location and name of the currently selected preset. the Synth 
section display shows the Oscillator and Oscillator Configuration settings 
for the currently selected preset.

LISt VIEW

turn the 

SYNTH PRESET

 dial while pressing 

SHIFT

 to enter the Synth 

Preset 

LIST

 view. the three soft buttons, 

Samp

, 

Synth

 and 

Category

 

(

Classic Synth

 in the example picture below) can be used to isolate the 

content you are currently looking for. 

Содержание Stage 3

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды