55
"
!!
!!:
The six buttons on the control panel enable you to review and change
printer settings.
The buttons used in printer configuration are explained in detail in
chapter 4, “Printer Configuration,” of the
Reference
manual. Before
Indica-
tor
On
Off
Amber lights indicate the location
of any media jam.
Remains on when the printer has
finished warming up and is ready
to print.
»
Note: When this indicator is
blinking, the printer is warming
up or is in Energy Saver mode.
When the printer experiences a
condition that will not allow the
printer to operate, or the printer
is not ready to print.
The printer is receiving data
through one or more of its
simultaneous interfaces (usually
accompanied by a status message
in the message window).
The printer is not receiving
data.
Indicates the printer requires
operator attention (usually
accompanied by a status message
in the message window).
Indicates that the printer is on line
and ready to accept data.
The printer is off line and not
ready to accept data, or an
error condition exists.
Ready
Data
Message
Online
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500