nord NORDAC START Series, Руководство пользователя

Страница: 84 / 120

NORDAC START (SK 135E / SK 175E) – Users Manual for Motor Starters
84 BU 0135 en-4118
5.2.1 Operating displays
P000 Operating display RD
Display range 0.01 … 9999
Other applicable parameter(s): P001
Description In the SimpleBox (SK CSX-3H) display, the operating value selected in parameter
online is displayed.
P001 Selection of display value RM
Setting range 0 … 11
Other applicable parameter(s): P000
Factory setting { 0 }
Description
Selection of the operating value to be displayed (see
P000
)
Setting values
Value Meaning
0 Actual frequency [Hz]
Output frequency currently being supplied by device
1 Nominal frequency [Hz]
Frequency of mains voltage that is currently present
2 Current [A]
Current output current measured by device
3 Effective current [A]
Effective current currently being supplied by device
4 Reactive current [A]
Reactive current currently being supplied by device
5 Mains voltage [V]
Voltage currently being measured at the input terminals
6 cos Phi [-]
Calculated value of current power factor
7 Apparent power KVA Calculated value of current apparent power
8 Effective power [kW]
Calculated value of current effective power
9 Mains phase sequence [-] 0 = Clockwise rotating field
1 = Counter-Clockwise rotating field
10 Duty factor [%] Phase angle control value currently being achieved by device.
0 % = "Motor off", 100 % = "Motor voltage = Mains voltage"
11 Actual current
amplification
[%]
Actual measured current in relation to the measurement range
P003 Supervisor code RM
Setting range 0 … 9999
Factory setting { 1 }
Description
The scope of the visible parameters can be influenced by setting the supervisor code.
Setting values
Value Meaning
0 Supervisor mode off
The supervisor parameters are not visible.
1 Supervisor mode on
All parameters are visible.
2 … Supervisor mode off
The supervisor parameters are not visible.