nord NORDAC FLEX SK 2 E-111-123-A Series, Руководство пользователя

Страница: 268 / 284

NORDAC FLEX (SK 200E ... SK 235E) – Users Manual for Frequency Inverters
268 BU 0200 en-US-4920
Pos : 760 /Anleit ungen/El ektr onik /FU und St art er/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/ 87Hz Kennli nie [SK 1x 0E, SK 2xx E] @ 2\m od_1347450038971_14638. docx @ 46325 @ 3 @ 1
8.8.2 87 Hz characteristic curve (only 400 V devices)
(

Variation 1:17 AM)
The 87 Hz characteristic represents an
extension of the speed adjustment range with
a constant rated motor torque. The following
points must be met for realization:
• Motor delta connection with a motor
winding for 230/400 V
• Variable Frequency Drive with an operating
voltage 3~400 V
• Output current of variable frequency drive
must be greater than the delta current of
the motor used (ref. value

variable
frequency drive power ≥ √3 motor power)
Kennlinie 87 Hz (4-poliger Motor)
0
0,2
0,4
0,6
0,8
1
1,2
0 10 20 30 40 50 60 70 80 90 100
Frequenz / Hz
M/Mn
M/M
N
P/P
N
0
1445 2890
Frequency
[Hz]
Speed
[rpm]
Characteristic 87 Hz (4-pole motor)
Figure 39: 87 Hz characteristic curve
In this configuration, the motor used has a rated operating point at 230 V/50 Hz and an extended
operating point at 400 V/87 Hz. This increases the power of the drive by a factor of
√
3 The nominal
torque of the motor remains constant up to a frequency of 87 Hz. Operation of a 230 V winding with
400 V is totally uncritical as the insulation is designed for test voltages of > 1000 V.
Pos : 761 /Anleit ungen/El ektr onik /FU und St art er/8. Z us atzi nform ati onen/Motor daten Kennlini en [SK 1x 0E, SK 2x 0E]/ 87Hz Kennli nie_Tabellen [ SK 2xxE] @ 6\mod_1429275790438_14638.docx @ 212333 @ @ 1
NOTE: The following motor data applies to standard motors with 230 V/400 V windings.
Motor
(IE1)
SK …
Variable
Frequency
Drive
SK 2xxE-…
M
N
*
[Nm]
Parameterization data of variable frequency drive
F
N
[Hz]
n
N
[rpm]
I
N
[A]
U
N
[V]
P
N
[kW]
cos
ϕ
Y/
Δ
R
St
[
Ω
]
71S/4 550-340-A 1.73 50 1365 1.3 230 0.25 0.79
Δ
39.9
71L/4 750-340-A 2.56 50 1380 1.89 230 0.37 0.71
Δ
22.85
80S/4 111-340-A 3.82 50 1385 2.62 230 0.55 0.75
Δ
15.79
80L/4 151-340-A 5.21 50 1395 3.52 230 0.75 0.75
Δ
10.49
90S/4 221-340-A 7.53 50 1410 4.78 230 1.1 0.76
Δ
6.41
90L/4 301-340-A 10.3 50 1390 6.11 230 1.5 0.78
Δ
3.99
100L/4 401-340-A 14.6 50 1415 8.65 230 2.2 0.78
Δ
2.78
100LA/4 551-340-A 20.2 50 1415 11.76 230 3.0 0.78
Δ
1.71
112M/4 751-340-A 26.4 50 1430 14.2 230 4.0 0.83
Δ
1.11
132S/4 112-340-A 36.5 50 1450 20.0 230 5.5 0.8
Δ
0.72
132M/4 152-340-A 49.6 50 1450 26.8 230 7.5 0.79
Δ
0.46
132MA/4 182-340-A 60.6 50 1455 32.6 230 9.2 0.829
Δ
0.39
160MA/4 222-340-A 72.2 50 1455 37 230 11 0.85
Δ
0.36
* at rated point