nord B 1050, Инструкция по эксплуатации и сборке, Страница: 66 / 112

Industrial gear units – Operating and Assembly Instructions
66 B 1050 en-4419
5 Service and maintenance
5.1 Service and Maintenance Intervals
Service and Maintenance
Intervals
Service and maintenance work
Information
see section
According to
manufacturer's details
• Option PT100: Check the function and measurement
accuracy; recalibrate as necessary
Manufacturer's
documentation
• Option LC/LCX: Check the function and measurement
accuracy of the pressure monitor, recalibrate as necessary
• Option CS1: Service the oil / water cooler
• Option CS2: Service the oil / air cooler
• Brakes: check for wear
• Couplings: Service the drive and output couplings
Standstill/storage >
6 months
• Regularly check the protective coating on unpainted and
painted surfaces
• Check the condition of the oil
• Check the seals
3.3
Daily • Visual inspection of the contamination indicator 5.2.6
• Check oil temperature 4.8
• Check oil pressure 4.3
• Check if the operating noise has changed 5.2
Every 100 operating hours,
but at least weekly
• Visual inspection for leaks 5.2
• Check the gear unit for unusual running noises and
vibrations
5.2
After 500 operating hours • First oil change after commissioning 5.2.8
• Check the brake
– Inspect the wear pattern of the brake
– Check the lining wear correction
3.23
• Check the coupling
– Check the wear of dog couplings
3.15, 3.16
At least once per month • Option FAN: Check the air cooler / gear unit for dirt and dirt
deposits
5.2.7
• Option CS2: Check the heat exchanger for dirt 5.2.7
• Check the covers and the attachment adapters for dirt and
dirt deposits
5.2.7
At least once within
3 months
• Belt drive option: Inspect the pulleys and belts for wear and
condition. (Profile gauges)
5.2.15