nord 6052902/0213, Руководство с инструкциями по установке, Страница: 13 / 128

1 Safety information
B 1050 en-3921 13
1 Safety information
1.1 Intended use
These gear units are used to transmit rotary movements. They convert velocity and torque. They are
intended for use as part of a drive system in commercially used plant and machinery. The gear units
must not be operated until it has been established that the plant or machinery can be safely operated
with the gear unit. Suitable protective measures must be provided if failure of a gear unit or a geared
motor could result in a risk to persons. The machine or system must comply with local legislation and
directives. All applicable health and safety requirements must be met. In particular, the Machinery
Directive 2006/42/EC, TR CU 010/2011 and the TR CU 020/2011 must be especially observed in the
relevant areas of application.
The gear units may not be used in environments in which an explosive atmosphere can occur.
The gear units may only be used according to the information in the technical documentation from
Getriebebau NORD GmbH & Co. KG. Damage to the gear unit may result if the gear unit is not used
as intended and according to the information in the operating and assembly manual. This may also
result in personal injury.
The base or the gear unit mount must be appropriately designed for the weight and torque. All of the
fastenings provided must be used.
Some gear units are equipped with a cooling coil. These gear units may only be operated if the cooling
circuit is connected and in operation.
1.2 Do not make any modifications.
Do not make any structural modifications to the gear unit. Do not remove any protective guards.
1.3 Performing inspection and maintenance work
Due to lack of maintenance and damage, malfunctions may occur which can result in personal injury.
• Carry out all servicing and maintenance work at the specified intervals.
• Also note that servicing is necessary after long storage periods prior to commissioning.
• Do not operate damaged gear units. The gear unit must not have any leaks.
1.4 Personnel qualification
All transport, storage, installation, commissioning and maintenance work must be carried out by
qualified specialist personnel.
Qualified specialist personnel are persons who have the training and experience to recognise and
avoid any possible risks.