Nord Drivesystems SK 180E Series, Руководство пользователя

Страница: 54 / 212

NORDAC BASE (SK 180E / SK 190E) – Users Manual for Frequency Inverters
54 BU 0180 en-4118
( 1 ) Year of manufacture
( 2 ) Marking of the device (ATEX)
IP55:
II 3D Ex tc IIIB T125 °C Dc X
IP66:
II 3D Ex tc IIIC T125 °C Dc X
Categorisation:
• Protection with "housing"
• Procedure "A" Zone "22" Category 3D
• Protection class IP55 / IP66 (according to the
device)

IP66 is required for conductive dust
• Maximum surface temperature 125°C
• Ambient temperature -20°C to +40°C
Information
Potential damage
Devices in series SK 1x0E and the permitted options are only designed for a degree of mechanical stress that
corresponds to a low impact energy of 7J.
Higher loads will lead to damage to or in the device.
The necessary components for making adaptations are contained in the ATEX kits.
Device Kit designation Part Number Quantity Document
SK 1x0E-… (IP55) SK 1xxE-ATEX-IP55 275274207 1 TI 275274207
SK 1x0E-…-C (IP66) SK 1xxE-ATEX-IP66 275274208 1 TI 275274208
2.5.1.2 Options for ATEX Zone 22, category 3D
In order to ensure that the device is ATEX-compliant, its optional modules must also be approved for
potentially explosive areas. Option modules that are not in the following list may not be used in an
ATEX zone 22 3D. This also includes connectors and switches that may also not be used in such an
environment.
Control and parametrisation units are basically not approved for operation in ATEX zone 22 3D .
They may therefore only be used for commissioning or maintenance purposes and if it has been
ensured that no explosive dust atmosphere exists.
Designation Part Number Use permitted
Braking resistors
SK BRI4-1-100-100 275272005 Yes
SK BRI4-1-200-100 275272008 Yes
SK BRI4-1-400-100 275272012 Yes