Nord Drivesystems PMSM, Руководство с инструкциями по установке

Страница: 23 / 40

3 Transport, storage, assembly
B 5000 en-2621 23
3 Transport, storage, assembly
3.1 Transporting the drive
WARNING
Hazard due to falling loads
• The thread of the eye bolt must be fully screwed in.
• Do not pull on the eye bolt at an angle.
• Note the centre of gravity of the motor.
Use every eye bolt attached to the drive for transport. Do not attach additional loads. The eye bolts are
not designed for lifting the motor with attachments.
Only use the intended eye bolts or support pins for transporting machine units, e.g. gear unit
attachments. Machine units must not be lifted by attaching them to the individual machines.
Use suitable lifting equipment to prevent any damage to the motor.
For the weight of the motor refer to the table below.
Size m [kg]
71N1/8 4,9
71N2/8 6,0
71N3/8 7,0
80T1/4, 80T1/4 Δ 8,0
80T1/4 HM 7,8
90N1/8 10,0
90N2/8 10,8
90N3/8 13,2
90T1/4, 90T1/4 Δ 10,0
90T3/4, 90T3/4 Δ 12,0
90T3/4 HM 11,6
100T2/4, 100T2/4 Δ 18,0
100T5/4, 100T5/4 Δ,
100T5/4 HM
21,0
Table 8: Weights of the motor