6 Operating status messages
BU 0250 en-3021
165
Pos: 567 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Darstellung der Meldungen @ 3\mod_1361802708455_388.docx @ 59827 @ 2 @ 1
6.1 Display of messages
Pos: 568 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Darstellung der Meldungen - LED Anzeigen [SK xxxE-FDS] @ 12\mod_1468482312711_388.docx @ 339100 @ 5 @ 1
LED indicators
The device status is indicated by an externally visible “FI status” LED (
Section 3.1 "Displays").
Pos: 569 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Darstellung der Meldungen - SimpleBox / ControlBox Anzeige [SK xxxE, SK 5xxP] @ 3\mod_1361801795294_388.docx @ 59802 @ 5 @ 1
SimpleBox Display
The SimpleBox displays an error with its number and the prefix "E". In addition, the present fault can
be displayed in array element [
-01
] of parameter (
P700)
. The last error messages are stored in
parameter (
P701
). Further information about the frequency inverter status at the moment of the fault
can be obtained from parameters (
P702
) to (
P706
) / (
P799
)
If the cause of the error is no longer present, the error display in the SimpleBox flashes and the error
can be acknowledged with the Enter key.
In contrast, warning messages are prefixed with "C" ("
Cxxx
") and cannot be acknowledged. They
disappear automatically when the reason for them is no longer present or the frequency inverter has
switched to the "Error" state. Display of the message is suppressed if the warning appears during
parameterisation.
The present warning message can be displayed in detail at any time in array element [
-02
] of
parameter (
P700
).
The reason for an existing disabled switch on cannot be displayed with the SimpleBox.
Pos: 570 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Darstellung der Meldungen - ParameterBox - Anzeige @ 3\mod_1361801566355_388.docx @ 59779 @ 5 @ 1
ParameterBox display
The ParameterBox displays the messages in plain text.
Pos: 571 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Diagnose LEDs/Diagnose LEDs am Gerät (Über) [SK 1xxE, SK 2xxE, SK xxxE-FDS] @ 1\mod_1343201905326_388.docx @ 36935 @ 2 @ 1
6.2 Diagnostic LEDs on device
The device generates operating status messages. These messages (warnings, errors, switching
statuses, measurement data) can be displayed with parametrisation tools (
Section 3.2 "Control and
parametrisation options ") (Parameter group
P7xx
).
To a limited extent, the messages are also indicated via the diagnostic and status LEDs.
Pos: 572 /Anleitungen/Elektronik/FU und Starter/6. Meldungen zum Betriebszustand/Diagnose LEDs/Diagnose LEDs am Gerät_Ergänzung [SK 2xxE-FDS] @ 12\mod_1467357317923_388.docx @ 335830 @ @ 1
Explanations of the LED indicators can be found in
Section 3.1 "Displays".
Pos: 573 /Allgemein/Allgemeingültige Module/---------Seitenumbruch kompakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1
Содержание NORDAC LINK SK250E-FDS
Страница 211: ...Key word index BU 0250 en 3021 211...
Страница 212: ...6072502 3021...
