norbar NorTronic 43500, Руководство оператора

Страница: 23 / 28

21
Auto Reset (Hold Time ?)
Auto Reset ?
Not Enabled
Press or to change setting.
If Enabled, pressing or will take the user to ‘
SETUP
Hold Time ? ’.
If Not enabled the user will return to SETUP .
 Enabled = Hold the torque (and angle) values the length of the Hold Time setting after the torque has
been removed and then reset the display to
0 .
 Not Enabled = Hold the torque (and angle) values until the ZERO button has been pressed and then
reset the display to 0 .
Hold Time ?
Hold Time ?
4
Sec
Press or to change value.
Press or to confirm and go to SETUP (saving changes).
 Minimum = 1 , Maximum = 10 . Default = 4
Display
Inverse ?
Not Enabled
Press or to change value.
Press or to confirm and go to SETUP (saving changes).
 Enabled = Black digits on White background, Not Enabled = White digits on Black background, when
in the
Measure display
.
WARNING: WHITE DIGITS ON BLACK BACKGROUND WILL REDUCE THE
OPERATIONAL BATTERY LIFE BY APPROXIMATELY 65% .
Torque CRS
Distance ?
31.8
mm
Press or to change value.
Press or to confirm and go to SETUP (saving changes).
 Minimum =
0.0
, Maximum =
999.0
. Default: - NorTronic
®
50 & 200 =
31.8 mm
, NorTronic
®
330 =
35.0 mm
.