Noraxon Ultium EMG Analog Input SmartLead, Руководство пользователя

Страница: 8 / 28

Analog Input SmartLead
P-811 Rev B (May 2019)
8
5 Getting Started
5.1 Quick Start Guides
Please see the hardware manual for the appropriate EMG system.
P-880: Ultium hardware user manual
6 Preparing the Product for Use
6.1 Unpacking and Component Identification
Ultium FootSwitch SmartLead with 2.5mm
TRRS Mating Connector (Part #802)
OR
Ultium FootSwitch SmartLead with Exposed
Input Wires (Part #802)
Additional contents not illustrated
Ultium Analog Input User Manual (part #811A) This document
6.2 Component Inputs, Outputs, and Indicators
1 Ultium Sensor (front and top edge)
SmartLead Connector
– Connector
for SmartLeads to change function
of the Ultium sensor.
Status LED
– Sensor operational
indicator flashes green when
measuring. Solid Yellow when
charging.
Power Button
– Power the sensor
On/Off. Hold for 3+ seconds for a
hard reset.
2 EMG Sensor (back and bottom edge)