Norand 6200, Руководство пользователя

Страница: 45 / 74

SECTION 3
"
Routine Care and Maintenance
6200 Hand-Held Computer
3-7
1.
2.
1
2
Directional arrows on case (top and bottom)
Latch knobs (top and bottom)
Figure 3-3
Removing The Hand Strap
3. Open the top latch knob (in the direction of the arrow) and swing the
latch open.
4. Remove the backup battery. You may need to refer to Replacing the
Backup Battery steps on page 3-3.
5. Remove the two small screws inside the backup battery compart-
ment, (see Figure 3-4 on page 3-8).
Be careful not to lose the
screws inside the case . If they slip out of your fingers when you are
removing them, turn your hand-held upward and gently shake the
hand-held computer to remove the screws. If you do not recover them
you will experience problems installing memory cards and they could
become permanently lodged inside causing other problems.