![NorAM 65 E T4 FINAL Скачать руководство пользователя страница 55](http://html1.mh-extra.com/html/noram/65-e-t4-final/65-e-t4-final_operators-manual_1700489055.webp)
NORAM 65ET GRADER
3-1
Op
eration
3
Mounting and Dismounting
S
ECTION
3: O
PERATION
M
OUNTING
AND
D
ISMOUNTING
Use steps and handholds and face machine whenever mounting or dismounting the machine.
Maintain a three-point contact with the steps and with the handholds. DO NOT get on or off a moving
vehicle.
D
AILY
P
RE
-S
TARTING
I
NSPECTION
For maximum service life of the machine, make a thorough walk-around inspection before starting
the engine. Correct any item that requires repair, replacement or adjustment.
Check the following components:
• Tires - Check for worn, cut or improperly inflated tires.
• Moldboard - Check for worn or damaged cutting edges or end bits.
• Circle - Inspect circle area for proper adjustment, worn or damaged wear pads.
• Operator Station - Check damaged or failed instruments. Remove any loose items on the floor.
• Electrical - Look for worn insulation on wires and loose terminals or end connectors.
• Hoses - Check cooling system hoses for leakage. Check hydraulic hoses for leaks from cuts or
pinched hoses. Ensure hoses are not twisted, rubbing together or contacting sharp edges.
Look around and under the machine for:
• loose bolts,
• oil or coolant leaks, and
• broken or worn parts.
DO NOT use controls as handholds when mounting and dismounting.
Unintended machine or component movement may cause you to fall, resulting in
serious injury.
Pressurized fluid can penetrate body tissue and result in serious injury or death.
Leaks can be invisible. Keep away from any suspected leak. Relieve pressure in
the hydraulic system before searching for leaks, disconnecting hoses, or
performing any other work on the system. If you must pressurize the system to
find a suspected leak, use an object such as a piece of wood or cardboard rather
than your hands. When loosening a fitting where some residual pressure may
exist, slowly loosen the fitting until oil begins to leak. Wait for leaking to stop
before disconnecting the fitting. Fluid injected under the skin must be removed
immediately by a surgeon familiar with this type of injury.
Содержание 65 E T4 FINAL
