iii. Finalize the chassis assembly
iv. Install final electronics
Step 3:
Wrap a rubber band around each wheel. The grooves on the rim of the wheel will help you
align it in the center. It doesn’t need to be perfect! The rubber bands help give the ScioBot
traction on smoother surfaces, and protect the wheels from wear.
Required Parts and Components:
•
2x Completed wheel assemblies
•
1x Completed main chassis
Step 1:
Use the slots in the motor mounts to attach the wheel assemblies to the main chassis. It
does not matter if the motors are oriented on top of the wooden stick or underneath. Just
make sure they are both the same, otherwise you will find that your ScioBot 1.0 is
lopsided!
Required Parts and Components:
•
1x AA Battery Holder
•
1x Mini Breadboard
Step 1:
Clip the AA Battery holder into the battery bracket. Orientation of the wires does not
matter. Just make sure they are able to reach the T-Connector where we will install the mini
breadboard.
©
Nonscio 2020
3
