Nonin Sensmart H500, Руководство оператора

Страница: 20 / 56

14
System Components and Set Up
System Components and Set Up
NOTES:
• Before using the system, please review all warnings and cautions.
• Before using the system for the first time, the battery should be charged
fully.
• Additional, but recommended, set-up tasks include: setting the clock.
Unpacking
Carefully remove the system components and accessories from the shipping
carton. Inspect all components for damage. Save the packaging materials in
case the monitor or accessories must be returned. Compare the packing list
with the accessories received to make sure the shipment is complete.
The standard system configuration includes these non-sterile components:
• D-HH, Nonin SenSmart handheld display
• SP-BLE, Nonin SenSmart Signal Processor, Bluetooth Low Energy
• H500-CC, Nonin SenSmart H500 System Carrying Case
• H500-PS, Nonin SenSmart H500 Power Supply
When the SP-BLE is stored in the H500-CC carrying case the surface
temperatures of the SP-BLE may exceed 41 degrees Celsius, reaching a
maximum temperature of 49 degrees Celsius. This temperature is safe for
contact with healthy adult skin for up to 1 minute. Once removed from the H500-
CC carrying case the surface temperature of the SP-BLE will cool to less than
41 degrees Celsius in less than ten minutes.
For a list of accessories, see "Parts and Accessories" section on page 33.
WARNING: Display and signal processor cannot be used outside of
carrying case.