Nomics Brizzy+, Руководство пользователя, Страница: 15 / 59

©nomics s.a. All rights reserved MU_Brizzy + _NS26_REV 1_EN /09-2019 13/57
CARRYING BAG
The carrying case allows the patient to carry the equipment home. It should contain
everything the patient needs to perform a recording.
Check that the special USB cable which serves to connect the recorder to a
computer is NOT included in the carrying case when it is handed to the
patient !
The case should contain the following items (Brizzy
+
NS26):
•
the patient leaflet,
•
the recorder (battery charged),
•
the auxiliary flow sensor and a new, unopened, nasal cannula,
•
the mandibular movement sensor, with adhesive tape strips (of hypoallergenic type) to
install the probes of the mandibular movement sensor on the forehead and on the chin,
•
the Xpod oximetry module, and an oximetry sensor from Nonin,
•
the recorder fastening belt.
Additional adhesive tape (of hypoallergenic type) can be added to hold the cables in place.
In addition to the diagnosis assistance of sleep apnea syndrome, Brizzy
+
authorizes a study
under Continuous Positive Pressure (CPP) to measure the efficiency of a treatment.
In this case, to record the pressure of the mask, the nasal cannula is replaced by a pressure
tube from the Luer-Lock connector of the flow sensor to the CPAP mask.
A more detailed study under CPP with Brizzy
+
is possible by replacing the flow sensor
(Nomics reference NS962) by a pneumotachograph module (Nomics reference NS960). For
more information, Refer to the instruction manual of the pneumotachograph sensor.
RECOMMANDATIONS TO BE GIVEN TO THE PATIENT
To ensure that the recording takes place in the best possible conditions and to avoid
damage or misuse, it is advised to explain to the patient how to operate the device and how
to position the sensors.