nmas Simple
Preparing for use nmas Simple
Overview
nmas Simple is designed for simple startup and operation. This means unit is
fully functional after connecting sensor and power cables. All cables are
marked with number or color codes for easy installation. Identifier codes are
marked on nmas Simple connection points and both ends of the cables.
Typical ways to access nmas:
•
local display (no configuration)
•
local nmas_network (no configuration)
•
local network (network configuration required)
•
remote connetion (no configuration)
•
nmas-cloud (no configuration)
Runnning nmas software does not require admin privileges if Java and Java
webstart support is installed. All software is downloaded and run from nmas-
cloud without local installation.
Fast start:
1. Power on nmas Simple, modem and PC
2. Check
nmas-Simple IP-address
on local display by pressing left
button (wlan0 ip-address)
3. Connect PC to wireless ”nmas_network” with password
”NMAS_Secrets”
4.
User web browser on PC to access
http://nmas-simple IP-address
Local display
User can access measurements through nmas Simple local display. In local
Page 20
Picture 19: nmas-Simple IP-address
Picture 18: nmas local display
Содержание nmas Simple
Страница 1: ......
