A
CCESS
G
ATEWAY
System Administration
197
default setting for this option is “disabled” because ICMP pass- through is a useful end-user troubleshooting
feature and is also required by certain smart clients (for example, GRIC).
1.
From the Web Management Interface, click on
System
, then
ICMP
. The
ICMP
screen appears:
2.
Click on the check box for
Block ICMP from pending users
to enable (or disable) this feature, as
required.
3.
You can
Ping a host via the network port
by entering either an IP address or DNS name of host.
This is the site that you want the ping to be sent to from the NSE.
4.
Click on the
Save
button to save your changes, or click on the
Restore
button to reset all values to
their previous state.
Importing Configuration Settings from the Archive File {Import}
This procedure shows you how to restore the system configuration settings from an archive file (previously
created with the
export
function).
You will need to reboot the system for some of the imported default settings to take effect
(especially DHCP).
1.
From the Web Management Interface, click on
System
, then
Import
. The
Import Configuration
screen
appears:
Содержание AG 2300
Страница 1: ......
Страница 184: ...ACCESS GATEWAY 172 System Administration...
Страница 294: ...ACCESS GATEWAY 282 Glossary of Terms...