Nomadix AG 2300, Руководство пользователя, Страница: 207 / 294

A
CCESS
G
ATEWAY
System Administration 195
Importing the Factory Defaults {Factory}
This procedure shows you how to replace the current authentication settings with the settings that were
established at the factory.
You will need to reboot the system for some of the imported default settings to take
effect.
1. From the Web Management Interface, click on System , then Factory . The Factory Configuration screen
appears:
Click to view the factory.txt and current.txt files
2. Click on the Restore then Reboot button to replace the current system configuration settings with the
factory default settings and reboot the Access Gateway.
Defining the Fail Over Options {Fail Over}
Your product license may not support this feature.
Many large scale networks require fail-over support for all devices in the public access network. The Fail
Over Options feature allows two Nomadix Gateways to act as siblings, where one device will take up the
users should the other device become disconnected from the network. As part of this functionality, the settings
(except IP addresses) between the two devices will be synchronized automatically.
1.
From the Web Management Interface, click on System , then Fail Over . The Fail Over screen appears: