Model no. CTI1513540 (39948) /CTI1513542 (39953)
1.Suitable for damp locations. This device is intended for indoor use or with an outdoor weather
protected fixture. Risk of shock – do not use where directly exposed to water.
2.The LED lamps are not suitable for use with dimmers.
3.The product is self-ballasted lamp, suitable for use in damp locations.
4.This device is not intended for use with emergency exits
5.They are not intended for use in totally enclosed lighting fixture.
6.Assure that the fixture can support the added weight of the lamp/bulb.
7.Turn off power before inspection, installation, or removal.
CAUTION:
Strobe lights have been known to trigger seizures in people with photosensitive epilepsy
Do not shine directly into eyes. This is not a toy. Use for decoration only. Remove and discard all plastic
fasteners and tags.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference thatmay cause undesired operation.
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
thefollowing measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
KALEIDOSCOPE LIGHT BULB
FEATURES
• Fits E26 light socket
• Use multiple projectors for an even more dramatic effect
• Suitable for installation in damp locations
For damp locations
Retain carton for storage purpose
Instruction Manual
CAUTION:
SAFET
Y INFORMA
TION
