CLASSIC STRING LIGHTS
IMPORTANT:
Please read this manual carefully before assembly and save it for reference
model no. 151-3907-6 | contact us 1-866-827-4985
Caution
W
arranty
This NOMA products carries a three (3) year warranty against defects in workmanship and materials. NOMA Canada agrees to
replace a defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase.
This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Troubleshooting
MADE IN CHINA
Imported by NOMA Canada
Toronto, Canada M4S 2B8
USER SERVICING INSTRUCTIONS
a. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in
outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided,
contact a qualified electrician for proper installation.
b. This seasonal-use product is not intended for permanent installation or use.
c. Do not mount or place near a gas or electric heater, fireplace, candles or other similar sources of heat.
d. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
e. Do not let lamps rest on the supply cord or on any wire.
f. Unplug the product when leaving the home, when retiring for the night, or if it will be left unattended.
g. This is an electric product — not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
h. Do not use this product for other than its intended use.
i. Do not hang ornaments or other objects from cord, wire, or light string.
g. Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
k. Do not cover the product with cloth, paper or any material not part of the product when in use.
l. This product is equipped with push-in type lamps. Do not twist lamps.
m. Read and follow all instructions that are on the product or provided with the product.
n.
SAVE THESE INSTRUCTIONS
a. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which
the needles are brown or break off easily. Keep the tree holder filled with water.
b. If the product is placed on a tree, the tree should be well secured and stable.
c. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose connections or exposed copper wire.
d. When storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to
avoid any undue strain or stress on the product conductors, connections, and wires.
e. When not in use, store neatly in a cool, dry location protected from sunlight.
Use and Care Instructions
For indoor use only
CAUTION:
1. Risk of fire. This product does not contain lamp shunts, which allow the product to operate if one lamp burns out. Do not
replace lamps with other than the spare lamps provided with this product.
2. To reduce the risk of fire and electric shock:
a) Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal, and
b) Do not mount or support strings in a manner that can cut or damage wire insulation.
3. To reduce the risk of fire and electric shock, use only the power supply that was provided with this product.
CAUTION: This is an electric product — not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
CAUTION – To reduce the risk of overheating, replace burned-out lamps promptly. Use 3.6 V, 20 mA or 2.4 V,20 mA lamps only.
CAUTION – Do not overload. The maximum number of lamps is 1300.
Connecting Sets End to End:
When multiple products are connected together, do not exceed the lowest of the indicated maximum wattage on the cord tag.
!
Retain carton for storage purposes
Instruction Manual
MD
Warning
Lamp Replacement
Step 1.
Grasp the power adaptor or power cord plug to unplug from the power outlet. Do not pull on the power cord.
Step 2.
Lift up lamp lock tab,
then pull the lamp and plastic
lamp base straight out of the
lamp-holder.
Step 3.
Replace with a
new spare lamp provided
with this product.
(Reference figure only)
