500 W HALOGEN WORK LIGHT
Sa
fety
CAUTION: LAMP BECOMES HOT WHEN IN USE.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXCESSIVE UV RADIATION OR PERSONAL INJURY:
1. Turn off, unplug, and allow unit to cool down before replacing light bulb.
2. Lamp gets hot very quickly! Touch only the switch when turning on. Do not touch hot lens, guard, or enclosure.
3. Do not remain in front of light if skin feels warm. Do not look directly at lamp.
4. Keep lamp away from materials that may be affected by heat.
5. Use only with the maximum bulb wattage suggested or less.
6. Do not touch bulb with bare hands. If unavoidable, use a soft dry cloth and wipe off oil from skin.
7. Do not use lamp with missing or damaged parts.
8. When using the portable work light outside, basic safety precautions should always be followed:
a) Use only with three-wire outdoor extension cords that have two prongs and ground pin.
b) Ground Fault Circuit Interrupter (GFCI) protection should be used on the circuit(s) or outlet(s) when used in wet locations.
c) Use only with an extension cord for outdoor use: SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW-A, SJOW,
SJOW-A, SJTW, SJTW-A, SJTOW, or SJTOW-A.
1. Handle
2. Handle tube
3. Lamp housing
4. Grill guard
5. Face plate
6. Base
7. Lock nut
1
2
3
4
5
6
7
model no. 052-4080-0 | contact us: 1-866-827-4985
For indoor and outdoor use
Retain carton for storage purposes
Instruction Manual
Bulb Installation
BULB INSTALLATION
1) Remove top face plate attachment screw.
2) To open, pull face plate down.
3) To remove old bulb, push light bulb to the right and pull out.
4) Place right end bulb on right socket, then insert left end onto left socket.
5) Secure face plate back in place.
ASSEMBLY INSTRUCTIONS
1) Fasten the grill guard to the light head:
a. Unscrew the face plate from the housing. [Fig. 1]
b. Insert the grill guard between the face plate and
the glass lens. [Fig. 2]
c. Screw the face plate back to the housing. [Fig. 3]
2) Insert the base tube into the handle tube as
indicated and attach with lock nut provided.
MADE IN CHINA
Imported by Noma Canada
Toronto, Canada M4S 2B8
500 W Halogen W
ork Light
IMPORTANT:
Please read this manual carefully
before assembly and save it for reference.