Table 8-33
Port Forwarding parameters
Field
Description
Application Name
Select an application name from the list.
The default is
Custom settings
.
WAN Port
Enter the WAN port range.
LAN Port
Enter the LAN port range.
Internal Client
Select a connected device from the list and enter the associated IP address.
Protocol
Select the port forwarding protocol from the list:
•
TCP
•
UDP
•
TCP/UDP
WAN connection list
Select a WAN connection from the list.
Note: Only active devices are shown on this list.
3
Click
Add
.
Click
Delete
to delete a port forwarding configuration.
E
ND OF STEPS
8.40
Configuring port triggering
1
Click
Application→Port Triggering
from the left pane. The Port Triggering page displays.
2
Configure the following parameters:
Figure 8-37
Port Triggering page
Configure a XS-2426G-B indoor ONT
Configuring the Application
Configuring port triggering
Nokia ONT
Review
Review
© 2021 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3FE-49546-AAAA-TCZZA
December 2021
128
Issue 1