PKD-1
SW security device
SW security device is a piece of hardware enabling the use of the service
software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the device
if needed.
RF shield box
Because the WCDMA network disturbs the RX side testing of the WCDMA
phone and the Tx signal of the WCDMA phone can severely disturb the
WCDMA network, a shield box is needed in all testing, tuning and fault
finding which requires WCDMA RF signal.
The shield box is not an active device, it contains only passive filtering
components for RF attenuation.
RJ-89
Rework jig
RJ-89 is a soldering jig used for soldering and as a rework jig for the
engine module.
SA-81
RF coupler
SA-81 is a coupler for WCDMA / GSM RF testing. It is used together with
SS-62 flash adapter base.
SES-3
Stencil
SES-3 stencil is used with MJS-76 / 0770417 and it supports the PA
component.
SES-3 is made for reworking purposes used in central service level.
RM-42
Nokia Customer Care
Service Tools and Service Concepts
Page 4–8
Company Confidential
9241872 (Issue 1)
Copyright ©2005 Nokia. All Rights Reserved.