Nokia RH-37 Series Скачать руководство пользователя страница 37

Страница: 37 / 72

Nokia Customer Care

Service Software and Tuning Instructions

Company confidential

RH-37

Issue 1 07/04



Page 37

JBV-1 Docking Station SW

The JBV-1 Docking Station is a common tool for all DCT-4 generation products.

In order to make the JBV-1 usable with different phone models, a phone specific Docking
Station Adapter is used for different service functions.

The JBV-1 Docking Station contains Software (Firmware) which can be updated.

You need the following equipment to be able to update JBV-1 software:

• PC with USB connection

• Operating System supporting USB (Not Win 95 or NT)

• USB Cable (can be purchased from shops or suppliers providing PC hardware and

accessories)

• JBV-1 Docking Station

• External Power Supply 11-16V

Before installation

Download the

Jbv1_18_update.zip

file to your computer (e.g. C:\TEMP) from your down-

load web site.

Close all other programs.

Follow instructions on the screen.

Installing SW needed for the JBV-1 SW update

Note: DO NOT CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER YET!

Run Jbv1_18_update.zip file and start SW Installation by double clicking Setup.exe.

Files needed for the JBV-1 Package setup program will be extracted.

Содержание RH-37 Series









































































Результаты поиска

Содержание RH-37 Series

Отзывы:

Бренды по названию

Популярные бренды

Nokia RH-37 Series, Инструкции по настройке и программному обслуживанию

Результаты поиска

Содержание RH-37 Series

Отзывы:

Бренды по названию

Популярные бренды