manualshive.com logo in svg

Nokia RH-37 Series, Инструкции по настройке и программному обслуживанию

Поделиться
Скачать
Nokia RH-37 Series Скачать руководство пользователя страница 29

Nokia Customer Care

Service Software and Tuning Instructions

                                  Company confidential

RH-37

Issue 1 07/04

Copyright 

Nokia. All rights reserved.

Page 29

Updating Flash Support Files for FPS-8* and FLS-4*

Before installation

• Install Phoenix Service SW. 

• Install phone model Specific Data package for Phoenix.

The flash support files are delivered in the same installation package with Phoenix data 
packages or newer Phoenix packages beginning from September 2003.

Normally it is enough to install the Phoenix and phone data package only because the 
Phoenix installation always includes the latest flash update package files for FLS-4S / 
FPS-8*.

Separate installation package for flash support files is available, and the files can be 
updated according to this instruction if updates appear between Phoenix / data package 
releases.

Installing the flash support files (only separate installation package)

If you are not using a separate installation package, you can skip this section.

Start by double clicking 

flash_update_03_07_000.exe

. 

The installation begins. 

 

If the same version of the flash update package already exists, and you want to reinstall 

Содержание RH-37 Series









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды