Table 8-10
LAN parameters
Field
Description
Port Mode
All Ports to Bridge Mode
Select this checkbox to set all ports to Bridge mode.
Port 1 - 4
Select the port mode for each port and click
Save
.
•
Route Mode
•
Bridge Mode
IPv4 Address
Enter the IPv4 address of the ONT.
Subnet Mask
Enter the subnet mask of the ONT.
DHCP enable
Select this checkbox to enable DHCP.
DHCP Start IP Address
Enter the starting DHCP IP address.
DHCP End IP Address
Enter the ending DHCP IP address.
DHCP Lease Time
Enter the DHCP lease time (in min).
Primary DNS
Enter the primary DNS identifier.
Secondary DNS
Enter the secondary DNS identifier.
Static DHCP Entry
MAC Address
Enter the MAC address of the static DHCP
IPv4 Address
Enter the IPv4 address for the static DHCP
3
Click
Save
.
4
Configure the Static DHCP parameters.
5
Click
Add
.
You can click
Delete
to delete a Static DHCP MAC address or IPv4 address.
E
ND OF STEPS
8.18
Configuring LAN IPv6
1
Click
Network→LAN_IPv6
from the left pane in the 10G PON Home Gateway page. The LAN_
IPv6 page displays.
Configure a XS-2426G-A indoor ONT
Network configuration
Configuring LAN IPv6
Nokia ONT
Draft
Draft
December 2020
Issue 1
99
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA