8.42
Configuring NTP
1
Click
Application→NTP
from the left pane in the 10G PON Home Gateway page. The NTP
page displays.
2
Configure the following parameters:
Table 8-36
NTP parameters
Field
Description
Enable NTP Service
Select this checkbox to enable the NTP service.
Current Time
Enter the current local date and time.
Primary Time Server
Select a time server from the list or select
Custom settings
and enter the address of the time server.
Secondary Time Server
Select a time server from the list or select
Custom settings
and enter the address of the time server.
Third Time Server
Select a time server from the list or select
Custom settings
and enter the address of the time server.
Interval Time
Enter the interval at which to get the time from the time server, in seconds.
Time Zone
Select the local time zone from the list.
Figure 8-41
NTP page
Configure a XS-2426G-A indoor ONT
Configuring the Application
Configuring NTP
Nokia ONT
Draft
Draft
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-49348-AAAA-TCZZA
December 2020
142
Issue 1